Directed Video DV2600 Operations Instructions download pdf (Page 11)

11- ENG

A00034

STARTING (continued)

8. Start engine. See Engine Owners

Manual for correct procedure.

NOTE: When engine rope is

pulled, pressure starts building in

the gun. If the engine does not

start after two pulls, pull the gun

trigger to relieve this pressure.

9. Depress trigger on gun to start

water flow. NOTE: Stand on a

stable surface and grip

gun/spray wand firmly with both

hands. Expect the gun to kick

when triggered.

10. Release trigger to stop water

flow.

11. Adjust spray for the task being

performed by changing quick

connect nozzle. See How To Use

Spray Wand instructions in this

section.

SHUTTING DOWN

1. After each use, if you have

applied chemicals, place chemical

hose into container of clean water

and draw clean water through

chemical injection system to rinse

system thoroughly. NOTE: Failure

to do so could cause damage to

the pump.

2. Turn engine off. See Engine

Owner’s Manual. NOTE: NEVER

turn the water off with the engine

running.

3. Turn water source off.

4. Pull trigger on spray gun to

relieve any water pressure in hose

or spray gun.

5. See Storage section in this

manual for proper storage

procedures.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments